1. Ensure that there is water on the surface of the front windshield. The wiping part of the car wiper blade is made of natural rubber. If the front windshield is very dry, the rubber surface will be scratched due to excessive friction. Wipe effect, so you must ensure that the front windshield surface has water before using the car wiper.
2. Clean the wiper strip and the attached attachments on the glass surface in time. Before the car wiper work, it is necessary to clean up the impurities attached to the glass surface and the wiper strip, because these impurities will increase the rubber strip and the glass when the wiper is working. The friction between them will block the rubber or scratch the surface of the glass, resulting in unclear scratches.
3. Stand up the wiper blades when parking. Stand up the wiper blades when parking to prevent the rubber strips from contacting the glass surface. Especially when the car is not used for a long time, the wiper blades should be erected. It is trapped between the rubber strips and the glass surface when parking. It will be covered with dust and impurities. When the wiper is used, these dust and impurities will forcefully rub the rubber strip or the surface of the glass, thereby affecting the wiping effect; when the car is parked, the large heat energy of the engine is from the engine cover to the windshield. If the wiper blade is not erected, it will accelerate the aging of the wiper blade.
4. Daily cleaning of the glass surface. In daily car washing, clean the oil stains or dirt attached to the surface of the front windshield to make the surface of the front windshield clean and free of attachments. Otherwise, the oil stains or dirt attached to the surface of the front windshield will cause wipers. The film bounces and makes noise during the scraping process.
5. Avoid the corrosion of chemical substances. Chemicals such as glass water will corrode the rubber strip and accelerate the aging of the rubber strip. Therefore, the front windshield should not be scrubbed with chemical substances as much as possible. Even if it is used, be careful not to let the chemical substance contact the rubber strip. .
6. Carefully clean the rubber strips. When cleaning the rubber strips of the wiper blades, wipe it with a soft cloth or rinse with water to avoid the use of improper cloths or excessive force from scratching or straining the rubber strips.