Si-820 Ceramic Coating Application Method

【Application Method】

� Important Notes:

Please make sure to apply and wipe off each panel before moving to the next.

Avoid working in temperatures above 30°C; shorten the wiping time accordingly.

✅ Application Steps

1. Apply 7–10 drops of ceramic coating onto the applicator sponge.
2. Spread evenly in a crosshatch ("#") pattern, covering approximately 50 × 50 cm per section. For larger panels, divide into half-sections.
3. Recommended drying time before wiping:
  - At 30°C → Wipe immediately after application
  - At 20°C → Wipe within 3 minutes
  - At 10°C → Wipe within 5 minutes
4. Wipe the surface to a glossy finish using a dry microfiber towel.
  - If difficult to wipe, use a damp towel first, then a dry towel
  - If necessary, lightly polish with a fine compound

� Aftercare Tips

Second layer can be applied after 2 hours for better protection.

Full curing takes about 1 week. Avoid washing or rain.

Use promptly or seal and refrigerate (4-10°C) after opening.

【Warnings】

· Do not drink;
· Keep out of reach of children;
· Flammable liquid, keep away from fire;
· Wash hands with soap after use;
· If ingested or enters eyes, seek medical attention immediately;
· For automotive use only.

Check out kisho YouTube here:

Hot Tags: si-820 ceramic coating application method, Japan, manufacturers, suppliers, factory, customized, brands, free sample, made in Japan