Professional Ceramic Coating Applicator

Some precautions about plating professional ceramic coating applicator construction

Pre-construction

1.Wait for the car to cool down before starting construction.

2.It is necessary to polish.

3.It is best to start construction after removing scratches and degreasing.

4.The construction should be carried out in a relatively closed, brightly lit space.

Under construction

1. It is necessary to divide the construction into sections, The area cannot be too large.

2.The section should be controlled within an area of 50*50 cm

3.Refer to the construction video.

4.Different models, different application methods

5.Water mist is sprayed before 901 construction.

6.The towel used for the first time after 901 smeared crystal plating is a damp towel (the wetness should not be wrung out).

7. Dry towels need to be converted to wet towels immediately, without waiting

8.The front and rear headlights do not need to be covered, and the plated crystal can be wiped off, but it should be polished just like the painted surface.

9.Overlapping construction, such as 701+901, the interval between two constructions should be at least 2-3 hours.

After construction

1.Put it in a closed environment as much as possible for 24 hours

2.Don't do water splash test after crystal plating.

3.Try not to touch water for 3-6 days after crystal plating.

4.If you want to avoid rain marks, try to use plating curing agent.

5.The use of crystal plating curing agent can be applied 2 hours after crystal plating.

Hot Tags: professional ceramic coating applicator, Japan, manufacturers, suppliers, factory, customized, brands, free sample, made in Japan